Note: This functionality is only available in AutoTURN and AutoTURN Pro.

Creates a new vehicle based on the selected vehicle as a starting point.

Note: If Permissions are enabled, this button displays only if you have the Standard or higher access level (see Program Settings -> Permissions Category: Access Levels).

Plan/Profile View Data Dialog Box

Displayed Data Section

This section provides the means to switch back and forth between plan/profile view data and roofline view data.

Plan/Profile View Data

Click Plan/Profile View Data to view the vehicle profile and edit the vehicle's plan data.

Roofline View Data

Click Roofline View Data to edit the vehicle's roofline data.

Creation Units

Displays the current vehicle's creation units. To store the vehicle's dimensions in alternate units, select the desired units from the list.

Profile Preview Area

Displays the vehicle profile selected under General Data, in the Vehicle Profile list.

Plan Preview Area

Displays the plan view of the current vehicle/part when Plan/Profile View Data is selected in the Displayed Data section.

Previous Part / Zoom / Next Part

In the case of multi-part vehicles, the entire vehicle or each vehicle part can be displayed by clicking / (Zoom In / Zoom Out) respectively. Each vehicle part can be navigated to by clicking / (Next Part / Previous Part).

Show Vehicle Body

Click this checkbox to display the parametrically drawn rectangular vehicle body. This checkbox is available only when the vehicle part has a realistic vehicle drawing (see Customizing AutoTURN Pro -> Creating a Realistic Vehicle Drawing).

 Share

Click this button in a network installation to share the custom vehicle's definition, realistic vehicle drawing, profile drawing, as well as load(s), sight line(s), and tracking points, if applicable, up to the network database so that they are available for all AutoTURN Pro users on the network (see Share Vehicle).

Note: This button displays if the custom vehicle has not already been shared. The system clocks of the workstations running AutoTURN Pro and the program files server must match for sharing to be successful.

 Articulate

Click this button to verify steering/articulating components. Demonstrates the articulation of the vehicle or part. The steering wheels and parts of the vehicle articulate in relation to each other to show how the vehicle geometry relates to each other.

General Data Section

This section provides the means to specify the current vehicle's name, library, region, country, profile type, vehicle profile, class, lock to lock time, and steering lock angle.

Profile Type

Select the desired profile type:

• If you have a profile drawing that encompasses all parts of the vehicle, select Vehicle.
• If you have individual part profile drawings for each part, select Parts.
• If you do not want to assign a profile drawing to the vehicle, select None.

Vehicle Profile

Select the vehicle profile drawing to be associated with this vehicle.

Class

Select the class of this vehicle. Class can be used to find vehicles via Group Vehicles By.

 Calculate Steering Lock

Click to calculate the steering lock angle for the given radius type and specified radius. See Calculate Steering Lock.

Current Part Data Section

Part Profile

Select the part profile drawing if Parts is selected in the Profile Type list.

 Steering Linkages

Click to set the articulating angle to rear steering angle relationships for a rear steered part in custom vehicles. See Steering Linkages.

 Cargo Details

Click to specify the cargo details for a special transport cargo or telescoping trailer. See Cargo Details.

 Corners

Click to specify fillets and/or chamfers for the corners of custom vehicles. See Corners.

Tractor/Trailer

Select the desired type of tractor/trailer.

Hint: To copy a tractor/trailer from an existing vehicle, click Get from vehicle in the list, and then use the Extract Tractor/Trailer Data dialog box to select the desired vehicle.

 Add New Part

Click to add a new part to the end of the vehicle.

 Delete Current Part

Click to remove the current part from the vehicle.

Width

Specify the body width of the current part.

Bunk Distance

For the telescoping trailer types, the distance from the front of the part to the bunk.

Steering Type

Select the steering type for the tractor and trailer parts from the available steering type for the current part.

Part Type		Description
Tractor
	Front Only	Steering axles in the front group only.
	Rear Only	Steering axles in the rear group only.
	Front and Rear	Steering axles in the front and rear groups.
	Front Fixed Only	Axles in the front group only and none are steering axles.
Trailer
	Rear Fixed	Axles in the rear group only and none are steering axles.
	Rear Steerable	Fixed and steering axles in the rear group.

Fixed Start and Num

The trailer's rear axle group can be configured for fixed and steering axles when the Rear Steerable steering type is selected. Configure the rear axle group by selecting the axle in the group where the fixed axles start from the Fixed Start list, and then selecting the number of fixed axles from the Num list. The Fixed Start axle is counted from the rear axle closest to the front of the part (see Axle Group Details).

The trailer cannot have the Rear Steerable steering type if the tractor has the Front and Rear steering type.

Articulating Angle

For multi-part vehicles, the angle between adjacent vehicle parts, such as between the tractor and trailer of a semitrailer vehicle. Also known as yaw.

Pitch

For multi-part vehicles, the angle of rotation around the lateral axis of the vehicle between a tractor and a trailer.

Roll

For multi-part vehicles, the angle of rotation around the longitudinal axis of the vehicle between a tractor and a trailer.

Axle Group Section

Axles

Specify the number of axles in the axle group.

Wheels

Specify the number of wheels per axle.

Track

Specify the width of the axles to the outside of the wheels.

Bogies

This is the number of bogies in the part.

Steerable

For steerable bogies, this indicates that the bogie axle group is steerable. Most vehicles with steerable bogies are shipped in two versions - with a front steerable axle group bogie or with a rear steerable axle group bogie. The names of vehicles with rear steerable axle group bogies end in "R" (e.g. Wind Tower Trailer C1R).

 Axle Group Details

Click to configure the front and/or rear axle group. See Axle Group Details.

 Bicycle Heights & Widths

Click this button to configure the bicycle's heights and widths. See Bicycle Dimensions.

Roofline View Data Dialog Box

Roofline/Outline Section

Select a roofline/outline from the list or click Import Outline or Roofline pick a pre-drawn polyline / complex chain.

If the picked element is an open polyline / complex chain (roofline):

• Pick a ground point, snap to an element drawn at the ground height, or right-click if the roofline is drawn with the ground at 0,0.
• Specify the overall Height of the vehicle.
• Specify the Ground Clearances values.
• Configure the vehicle's chamfers.

Example of a roofline drawing (grey lines are parametrically drawn by AutoTURN Pro)

If the picked element is a closed polyline / complex chain (outline):

• Pick a ground point, snap to an element drawn at the ground height, or right-click if the roofline is drawn with the ground at 0,0.

Example of an outline drawing (encompassing the entire vehicle/part)

Note: The custom roofline will no longer be available if you select a different roofline from the Roofline list. The custom roofline will need to be re-imported.

Connector Heights Section

The connector heights default to the part's respective ground clearance values depending on the tractor and trailer types. Select the Override checkbox to specify custom values.

Ground Clearances Section

These are the distances from the ground to the underside of the vehicle at the Front, Wheelbase, and Rear locations of the vehicle. Click Chamfers to specify chamfers for the profile of the vehicle.