Change the name, type, and width of stalls as well as add/remove wheel stops and exclude stalls from stall numbering.

Edit Stall Can Be Used in the Following Ways:

• To Change a Stall's Type

• To Change a Stall’s Width

• To Shift a Stall's Location in a Row

• To Change a Standard Stall to a Small Stall

• To Change a Stall to a Mid-island

• To Change a Mid-island to a Stall

• To Edit a Mid-island

• To Remove/Exclude Numbering from a Stall

Edit Stall

To Change a Stall's Type: This tool can be used to change the standard stalls generated automatically in lots and rows to User Defined Stall Types. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool. In the drawing, select one or more stalls that you want to edit. In the Edit Stall dialog box, select a new stall type from the Type list. Click Apply. Repeat steps 2 to 4 or right-click to end this tool.

To Change a Stall’s Width:

All stall types are defined with a width, however, User Defined Stall Types can be created with a Locked Width option. The width of the User Defined Stall Type can be changed in the Edit Stall dialog box if the Locked Width check box is cleared when the User Defined Stall Type is created or edited. Therefore, if one or more stalls are to have a width different than they were defined with, they need to be changed to a User Defined Stall Type with the Locked Width check box cleared.

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more stalls that you want to edit.

3. In the Edit Stall dialog box, select a User Defined Stall Type (one that you know has the Locked Width check box cleared) from the Type list.

4. Type a new Width for the stall.

5. Click Apply.

6. Repeat steps 2 to 5 or right-click to end this tool.

To Shift a Stall's Location in a Row:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more stalls that you want to edit.

3. In the Edit Stall dialog box, click Shift Stalls.

4. In the drawing, move the mouse in the direction of the red arrows.

5. Click in the drawing to set the new location of the selected stall(s).

6. Repeat steps 2 to 5 or right-click to end this tool.

To Change a Standard Stall to a Small Stall:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more stalls that you want to edit.

3. In the Edit Stall dialog box, select Small from the Type list. (The Small list item will not be available if there are no smaller layouts in the parking standard than the layout used in the selected stalls.)

4. Click Apply.

5. Repeat steps 2 to 4 or right-click to end this tool.

To Change a Stall to a Mid-island:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more stalls that you want to edit.

3. In the Edit Stall dialog box, select Mid-island from the Type list.

4. Confirm the mid-island’s Width and Radius then click Apply.

5. Repeat steps 2 to 4 or right-click to end this tool.

To Change a Mid-island to a Stall:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more mid-islands that you want to edit.

3. In the Edit Stall dialog box, select a non mid-island stall type from the Type list.

4. Click Exclude from Numbering to enable numbering in this stall.

5. Click Apply.

6. Repeat steps 2 to 5 or right-click to end this tool.

To Edit a Mid-island:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more mid-islands that you want to edit.

3. In the Edit Stall dialog box, modify the properties for Width and/or Radius as desired.

4. Click Apply.

5. Repeat steps 2 to 4 or right-click to end this tool.

To Remove/Exclude Numbering From a Stall:

1. Click Edit Stall on the ParkCAD Edit flyout or ParkCAD Edit toolbar if it is not already the current editing tool.

2. In the drawing, select one or more stalls that you want to edit.

3. In the Edit Stall dialog box, click Exclude from Numbering to disable numbering in this stall.

4. Click Apply.

5. Repeat steps 2 to 4 or right-click to end this tool.

Note: The selected stall(s) will not receive stall numbering until this setting is re-enabled. See Stall Numbering -> To Remove Stall Numbers.

See also: Edit Tools -> Selection Types