When the Copy, Move or Import from Database commands are used, the Path tab is in the Move Park mode. When in this mode, parameters can be defined for (re)positioning an existing park design.

Terrain

The top row in the Move Park tab controls the drawing X,Y plane or terrain on which the Park session is to be placed.

• Unless a terrain object(s) has been added in Drawing Manager -> Terrains, the terrain list will be disabled while the elevation (Z) cell will be active. This allows you to specify a drawing X,Y plane elevation for the session.
• If a terrain object(s) has been added in Settings > Terrains, the drop-down terrain selection list control will be enabled and this terrain object(s) will be available for selection, in addition to Drawing X,Y plane.

Insertion Method (Read-only)

The second row in the Move Park tab shows (read-only) the insertion method that was used during path construction prior to activation of the Move mode. See Park for an explanation of the various insertion methods.  

Insertion Point (Read-only)

The third row in the Move Park tab shows (read-only) the insertion point that was used during path construction prior to activation of the Move mode. See Park for an explanation of the various insertion points.

Original X,Y coordinates and orientation

The bottom row in the Move Park tab can be used to lock the X,Y position and orientation of the session when it is repositioned in the drawing. If this box is ticked, all coordinates, except elevation (Z), from the original session are used when placing the session in the drawing. Elevation is taken from the drawing X,Y plane or terrain selected in the top row.

After inserting the object in the drawing, the tab changes to the Park mode.