Note: This functionality is only available in AutoTURN Pro.

Properties' Envelopes (3D Simulations) Category Dialog Box

Envelopes Draw Options Section

Set which envelopes to draw in the turn simulations as well as the clearance distances where applicable. Click Properties to set the layer/level, color, and transparency for the elements that are selected to be drawn.

Tracking Points

Select this checkbox to have the tracking points envelope drawn, and then set the tracking points envelope’s color. A tracking point envelope is drawn for each tracking point created in Vehicle's -> Tracking Points.

Vehicle Body

Select this checkbox to have the 3D turn simulation drawn with a 3D vehicle body or 3D swept path envelope. The 3D swept path envelope is the widest path swept out by the sides and overhangs of the 3D vehicle.

Example of vehicle body envelope

Body Clearance

Select this checkbox, and then specify the Top Offset and Side Offsets values to have the 3D turn simulation drawn with envelopes generated at the distances offset from where the vehicle body envelope would normally be drawn.

Example of a vehicle body clearance envelope

Loads

Select this checkbox to have the 3D turn simulation drawn with the loads specified in Vehicles -> Define Loads.

Loads Clearance

Select this checkbox and then specify the Top Offset and Side Offsets values to have the 3D turn simulation drawn with envelopes generated at the distances offset from where the loads envelope would normally be drawn.

Reset Properties

Note: This functionality is only available in AutoTURN Pro.

Click this button to reset the properties in all category pages to the currently loaded property set file.

Save Properties

Note: This functionality is only available in AutoTURN Pro.

Click this button to save the current properties to a file. When you click this button, the Save Properties dialog box displays. In the Name box, type the desired name for the property set file, and then click OK.

Load Properties

Note: This functionality is only available in AutoTURN Pro.

Click this button to load a previously saved property set file. When you click this button, the Load Properties dialog box displays. Select the desired property set file in the list, and then click OK.

Extract Properties

Note: This functionality is only available in AutoTURN Pro.

Click this button, and then select an existing turn simulation to replace the current properties with the properties from the selected simulation.

Note: Selecting a 2D simulation will replace the 2D properties only. Selecting a 3D simulation will replace the 3D properties only.

Update

Click this button, and then pick an existing turn simulation in the drawing to update the turn simulation to the currently displayed properties . This is useful for making changes to existing turn simulations without having to regenerate or place them again.