GuideSIGN Plus 2024 Help
This feature is not available in GuideSIGN.
This setting tells the software what design units should be used for roadway placement. In MicroStation, this setting refers to the master units setting of the design file. Design units available are:
The units that the software will use for sign assembly creation depend on the design units selected for roadway placement:
| Roadway Placement | Sign Assembly Creation |
| feet | inches |
| survey feet | inches |
| meters | millimeters |
Select the active country's content if you have purchased additional country content.
Select the M.U.T.C.D. edition that the software should use to match the drawing. For the USA Region, for example:
Displays the current sign support symbol and sign group insertion scale. By default, the sign support symbol insertion scale is set to 1:1, and the sign group insertion scale, to 1:5. To modify the sign support symbol and sign group insertion scale, type the desired values in the Sign Support Symbol and Sign Group boxes respectively.
Displays the height of the sign assembly annotation text. By default, the sign assembly annotation text height is set to 0.125 inch (Imperial Convention) or 3 mm (Metric Convention). To modify the sign assembly annotation text height, type the desired value in the Sign Assembly Annotations box.
Note: If you change the roadway placement units (see Roadway Placement above), the software will convert the Sign Assembly Annotations value accordingly.
If the Reuse Available Sign Assembly ID check box is selected, the software will reuse the ID numbers assigned to the sign assemblies that have been deleted. If you clear the Reuse Available Sign Assembly ID check box, the software will assign the next consecutive number to each new sign assembly.