This feature is not available in GuideSIGN SIGMA.

Units Section

Select the units that the software should use to match the drawing's units. The units available are:

• inches
• millimeters

Region and M.U.T.C.D. Edition Section

Region

Select the active country's content if you have purchased additional country content.

M.U.T.C.D. Edition

Select the M.U.T.C.D. edition that the software should use to match the drawing. For the USA Region, for example:

• Click 1988 Edition to use M.U.T.C.D. 1988 panel styles, 1966/1977 Standard Alphabets, and M.U.T.C.D. 1988 content.
• Click 2003 Edition to use M.U.T.C.D. 2003 panel styles, 2000/2002 Standard Alphabets, and M.U.T.C.D. 2003 content.
• Click 2009 Edition to use M.U.T.C.D. 2009 panel styles, 2000/2002 Standard Alphabets, and M.U.T.C.D. 2009 content.

Only use indexed colors in the drawing (MicroStation only)

The software fully supports the standard colors for signing specified by the Federal Highway Administration (FHWA). If your workspace has not been configured to define custom colors, you can have the software determine the best RGB color matches for the FHWA standard colors in the attached color table and use the indexed colors for the inserted content.

To have the software use only indexed colors in the drawing, select the Only use indexed colors in the drawing check box.

MicroStation Working Units

Before using GuideSIGN Plus in MicroStation, the working units must be set so that the number of positional units per sub unit allows enough resolution to display the objects correctly. Examples of appropriate working unit settings for imperial and metric drawings are:

	Imperial Units	Metric Units
Master Units	ft.	m
Sub Units	in.	mm
Resolution	12000	1000000