Allows the sign facing to be specified for the sign assembly that is being placed in the sign plan drawing.
Note: The Perpendicular to Reference option is available in the Set Sign Facing dialog box if the sign support symbol was placed relative to a reference line or offset reference geometry (see Place Sign Support Symbol).
Click this option and then click Next to set the sign facing perpendicular to the reference line or offset reference geometry specified when the sign support symbol was being placed in the sign plan drawing (see Place Sign Support Symbol).
Click this option, specify the desired angle in the box, click Apply, and then click Next to specify the direction that the sign is facing.
To manually choose the sign facing angle, rotate the sign support symbol in the drawing as necessary, and then click to position the sign support symbol. As you rotate the sign support symbol, the Set Sign Facing value will update accordingly.
Note:
The sign facing angle is measured counter-clockwise from zero degrees East to a normal of the sign (i.e. perpendicular to the sign face).
The sign facing angle displayed/specified in the Set Sign Facing dialog box is always based on sign group 1.