This feature is not available in GuideSIGN.

Allows placement parameters to be modified for the sign support symbol of an existing sign assembly.

Note: If you do not need to perform any further steps in the process of editing a sign assembly, simply click Finish.

Move Sign Support Symbol Dialog Box

Sign Support Symbol Placement Section

Maintain Current Placement

Click this option and then click Next to preserve the current sign support symbol placement.

Change Placement

Click this option, then, in the drawing, click the desired sign support symbol, move it as necessary, and then click in the drawing to set its new placement.

Alternatively, if the sign assembly was placed in relation to a reference line, specify a distance from the Datum/Station and then click Apply.

Reference Line Section

This checkbox will be selected if the sign assembly was placed in relation to a reference line. Select a different reference line or offset reference geometry and/or type a new value in the distance box to move the sign assembly.

Clear this checkbox and then click a point in the sign plan drawing to place the sign support symbol.

Side of Reference

Click Left or Right to specify which side of the reference line or offset reference geometry to place the sign support symbol.

Note: If the sign support symbol was not originally placed relevant to a reference line or offset reference geometry, or if you select a different reference line or offset reference geometry, the default sign facing will be set perpendicular relative to the reference line or offset reference geometry selected in the list. You can modify sign facing at the next step using the Change Sign Facing dialog box.

Button	Option	Click to...
	Override Horizontal Clearance	Override the horizontal clearance for the reference line or offset reference geometry selected in the list.

Minimum Sign Support Distance

Makes it possible to specify a radius of the circle drawn around the sign support symbol during sign support symbol placement to help you choose a position that is far enough from other sign supports to ensure adequate spacing or a larger radius that would determine the suitable placement of repeated signs along the corridor. To specify the minimum sign support distance, select the Minimum Sign Support Distance checkbox, and then type the desired value in the corresponding box.

Override Base Elevation

When this checkbox is cleared, the elevation of the base of the 3D sign support is displayed as the sign support symbol is moved in the drawing with the pointing device.

When this checkbox is selected the elevation of the base of the 3D sign support can be specified.