AutoTURN Pro 11.0 Help
Inspect Simulation
Reports a selected simulation's steering lock angle, input speed, maximum speed, proximity to elements on specific layers/levels, turn wheels from stop condition, and minimum turn radius.
Select this check box to have the steering lock angle reported in the picked simulation.
The steering lock angle is denoted by circles along the simulation's centerline path. Two colors can be assigned to two steering angle values by clicking 
Configure Steering Angle:
Orange is the default color for the first value - approaching maximum (>=80%, by default).
Red is the default color for the maximum steering lock angle.
Select this check box to have the input speed reported in the picked simulation.
The input speed (the speed that the simulation was generated with) is denoted by circles along the simulation's centerline path. Three colors can be assigned and two values specified to give three speed ranges by clicking Configure Input Speed Ranges:
Yellow is the default color for the lowest speed range.
Green is the default color for the middle (Desirable) speed range.
Orange is the default color for the highest speed range.
Select this check box to have the maximum speed achievable reported in the picked simulation.
The maximum speed that the vehicle can obtain in the simulation is denoted by perpendicular lines intersecting the simulation's centerline path. Three colors can be assigned and two values specified to give three speed ranges by clicking Configure Maximum Speed Ranges:
Yellow is the default color for the lowest speed range.
Green is the default color for the middle (Desirable) speed range.
Orange is the default color for the highest speed range.
Select this check box and then specify the layers/levels that the obstacles are drawn on to report how close they are to the picked simulation.
The proximity to elements in the drawing is denoted by shading color bands. The three colors can be assigned and two distance values specified to give three color bands of decreasing proximity by clicking Configure Proximity Settings:
Red is the default color for the closest proximity to the simulation.
Yellow is the default color for the second closest proximity to the simulation.
Teal is the default color to denote that the simulation is clear of obstacles.
Set the transparency level of the shaded bands as desired.
Select this check box to have the Turn Wheels From Stop (TWFS) conditions reported in the picked simulation.
A rotated tire inside a circle drawn with the specified color (orange by default) will indicate where sections in the picked simulation started with the Turn Wheels From Stop setting.
Select this check box to have the Minimum Turn Radius condition reported in the picked simulation.
Rmin inside a circle drawn with the specified color (red by default) will indicate where sections in the picked simulation begin a minimum radius turn.
Select this check box to have the legend placed in the drawing.
Select this check box to remove the previous reports from the picked simulation.